6 Series E64 645Ci (N62) CONVER
51 71 041
Removing and installing/replacing rear left or
right wheel arch cover
Necessary preliminary tasks:
•
Remove rear wheel.
•
Remove rear lip
•
If necessary, disconnect and feed out plug connection on
brake pad sensor
Note:
The operation is described on the left side; proceed in the same
way for the right side.
Release short screws (1).
Slacken nut (2).
Release short screws (1).
Release long screw (2).
Unscrew nut (3).
Carefully feed out rear wheel arch cover towards bottom.
Installation:
Make sure rear wheel arch cover is correctly seated.
RA Removing and installing/replacing rear left or right wheel arch cover
BMW AG - TIS
04.02.2013 12:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
