6 Series E64 645Ci (N62) CONVER
52 14 050
Replacing lumbar cushion on front left or
right seat
Necessary preliminary tasks:
•
Remove rear panel on front seat backrest.
Unhook backrest cover from backrest frame at bottom and on
tunnel side, remove clips if necessary.
Partially pull off left or right backrest cover towards front.
Checks hoses (2) for identification mark and detach.
Note:
If necessary, gently heat air hose when firmly seated.
Installation:
Air hoses must be laid without kinks.
When replacing valve housing (valve unit): release screw (1) from
front.
Unhook lumbar cushion from spring wire.
Feed out hoses, remove lumbar cushion on tunnel side.
RA Replacing lumbar cushion on front left or right seat
BMW AG - TIS
04.02.2013 13:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
