6 Series E64 645Ci (N62) CONVER
52 14 198
Removing and installing/replacing rear panel
on left or right front seat backrest
(normal/manual)
Unfasten screws.
Carefully pull off rear panel (1) towards rear and unclip.
In so doing, make sure rear panel (1) feeds downwards out of
cover (2).
To release upper clips (3), if necessary pull upper rear panel
edge towards rear.
Installation:
Make sure that
-
clips are replaced and properly engaged,
-
rear panel is fed in under cover,
-
journals correctly engage in guides.
RA Removing and installing/replacing rear panel on left or right front seat backres
BMW AG - TIS
04.02.2013 13:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -