6 Series E64 645Ci (N62) CONVER
-
Check fluid level.
Release screw and remove lockplate (1).
Tightening torque 54 34 12AZ
.
Detach locking clip (3).
Detach cable straps (2).
Installation:
Replace faulty cable straps.
Detach hydraulic lines.
Important!
Protect joints (lines and cylinder) against dripping fluid, e.g.
with a cleaning cloth.
306.5
±
2 mm hydraulic cylinder protected with net hose on
delivery.
RA Removing and installing/replacing hydraulic cylinder for left clamping bar
BMW AG - TIS
04.02.2013 13:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
