6 Series E64 645Ci (N62) CONVER
54 34 250
Removing and installing left or right
tensioning belt
Necessary preliminary tasks:
•
Partially remove convertible top fabric
Release screws (1).
Open Velcro-type fastener in marked area.
Disengage locking pin (2) and remove tensioning belt.
Installation:
Make sure wiring harness is laid without kinks.
Make sure locking pin is correctly positioned in convertible top frame.
RA Removing and installing left or right tensioning belt
BMW AG - TIS
04.02.2013 13:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
