bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

8 RA Removing And Installing_replacing Hydraulic Unit For Convertible Top Drive > < 6 RA Topping Up_extracting Fluid, Checking Fluid Level|Page 2266
Page 1
background image

54 34 001

Checking function of EH convertible top

Carefully close convertible top until rotary latch (1) has retracted
by approx. 1/3 into striker.

Rotary latch (1) and journal (2) must close silently.

If necessary, adjust convertible top.

The convertible top is centered by the journal (2) as it retracts
into the guide.

Close convertible top, open and then close again.

Check all line connections for fluid leaks.

If necessary, check fluid level.

Function description (open/close):

Opening and closing of convertible top is only possible:

when the side windows are slightly lowered

when the rear window is completely lowered

when the convertible top compartment base is lowered

speed must be under 30 km/h

rear lid must be closed

outside temperature is between -10 

°

C and +80 

°

C

hydraulic pump motor 

90 

°

C

from ignition lock position "R" (radio setting)

while control switch in instrument panel is pressed

In event of function problems:

Check ambient conditions (e.g. convertible top compartment

base, rear lid, rear window etc.)

Perform diagnosis on convertible top (mechanical

components, hydraulic components, sensors etc.)

Perform emergency actuation

RA  Checking function of EH convertible top

BMW AG - TIS

04.02.2013  13:21

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

8 RA Removing And Installing_replacing Hydraulic Unit For Convertible Top Drive > < 6 RA Topping Up_extracting Fluid, Checking Fluid Level|Page 2266