bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 RA Replacing Drive_electronics Box For Left Adaptive Headlight|Page 2605 > < 9 RA Replacing Right Ignition Unit For Right Xenon Headlight
Page 1
background image

63 12 895

Replacing drive/electronics box for left
adaptive headlight

Warning!

Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).

Work on the entire xenon lighting system (control unit, ignition
unit and lamp) may only be carried out by specialist
personnel.

Important!

Read and comply with notes on protection against
electrostatic damage (ESD protection).

Necessary preliminary tasks:

Remove front left wheel arch trim

Note:

Depending on the build date, there is a screw fastening point
above or below the drive/electronics box for adaptive
headlight (2).

 

Release screws (1). Tightening torque 

63 12 5AZ

.

Remove drive/electronics box for adaptive headlight (2) in
direction of arrow from headlight (3).

RA  Replacing drive/electronics box for left adaptive headlight

BMW AG - TIS

04.02.2013  18:31

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Replacing Drive_electronics Box For Left Adaptive Headlight|Page 2605 > < 9 RA Replacing Right Ignition Unit For Right Xenon Headlight