6 Series E64 645Ci (N62) CONVER
63 13 200
Removing and installing/replacing front left or
right auxiliary turn signal lamp
Slide front auxiliary turn signal lamp (1) with trim strip (2)
towards rear and fold out in direction of arrow from front side
panel (3).
Remove trim strip (1) from front auxiliary turn signal lamp (2).
Unfasten plug connection (3) and disconnect.
Remove front auxiliary turn signal lamp (2).
Installation:
Make sure trim strip (1) is correctly seated on front auxiliary turn
signal lamp (2).
Fixtures (3), guide (4) and tab (5) must not be damaged.
Warning!
Follow instructions for handling light bulbs (exterior lights).
Replacement:
If necessary, convert bulb.
RA Removing and installing/replacing front left or right auxiliary turn signal lamp
BMW AG - TIS
04.02.2013 18:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
