6 Series E64 645Ci (N62) CONVER
63 25 000
Removing and installing/replacing
supplementary brake light (from 09/2007)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove panel for rear lid
Disconnect plug connection (1).
Unscrew nuts (2). Tightening torque 63 25 1AZ
.
Remove pressure springs (3) and washers (4).
Unlock locking hooks (6) and remove supplementary brake
light (5) in outward direction from rear lid.
Installation:
Make sure seal is correctly seated on supplementary brake
light (5).
Locking hooks (6) must not be damaged or missing.
Make sure locking hooks (6) are correctly engaged on rear lid.
Tighten nuts (2) from inside outwards.
RA Removing and installing/replacing supplementary brake light (from 09/2007)
BMW AG - TIS
04.02.2013 18:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
