6 Series E64 645Ci (N62) CONVER
Cut through cable ties (1).
Unclip wiring harness (2) at point (3).
Disconnect plug connection (4).
Cut through cable tie (1).
Pull jacket (2) off drive unit for lumbar support (3).
Pull transparent hose (1) off drive unit for lumbar support (2).
Note:
Gently heat transparent hose (1) if stuck.
Installation:
Transparent hose (1) of drive unit for lumbar support (2) must not
be kinked.
Remove drive unit for lumbar support (2).
RA Removing and installing/replacing lumbar support drive mechanism on front seat,
BMW AG - TIS
04.02.2013 20:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -