6 Series E64 645Ci (N62) CONVER
72 11 092
Removing and installing/replacing rear left or
right seat belt (roller)
Necessary preliminary tasks:
•
Remove backrest for rear seat
Note:
Illustration shows removal of left side.
The right side is removed in the same way as the left side.
Note:
Before removing reversing clip, mark position to ensure correct
alignment when installing.
Release screw (1).
Tightening torque 72 11 24AZ
.
Remove reversing clip (2).
Release screw (1) on automatic reel (2).
Tightening torque 72 11 20AZ
.
Remove automatic reel (2) in direction of arrow.
Installation:
Coding (3) of automatic reel must be seated in opening (4) of
body.
Release screw (2).
Tightening torque 72 11 22AZ
.
Remove seat belt (1).
Installation:
Secure fitting of seat belt (1) by means of stop (3) in guide.
RA Removing and installing/replacing rear left or right seat belt (roller)
BMW AG - TIS
04.02.2013 20:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
