6 Series E64 650i (N62TU) CONVER
Important!
Avoid a change of engine position in the transversal or
longitudinal direction.
Always make sure there is sufficient clearance between the
engine (or its attachment parts) and the body.
Important!
Risk of damage!
Position transverse member 00 0 200 with a 2nd person
helping by way of rests on bolt connections of side panels.
Secure special tool 11 0 020 to spindle 00 0 202 .
Attach suitable chains to special tool 11 0 020 and suspend
from both engine suspension eyelets.
Warning!
Danger of injury!
Tighten down all adjusting screws and nuts on
transverse member 00 0 200 .
Unscrew nuts (1).
Raise engine approx. 10 mm with transverse member.
Installation:
Replace self-locking nuts.
Tightening torque 22 11 2AZ
.
RA Securing engine in installation position (N62, N62TU)
BMW AG - TIS
05.02.2013 14:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -