6 Series E64 650i (N62TU) CONVER
Release screws and remove sealing element (2). Remove
sensors (3 and 4).
Installation:
Replace sealing element (2).
Replace sealing rings on sensors (3 and 4).
Removing ignition coils.
Release both grounding cables.
Unlock and detach vent hose.
Unclip cable duct (1) and remove cable from holder.
Remove servomotor for right eccentric shaft.
RA Removing and installing/sealing right cylinder head cover (N62/N62TU)
BMW AG - TIS
05.02.2013 14:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -