bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
4 RA Removing And Installing Right Cylinder Head (N62 From 9_03 And N62TU)|Page 288 > < 4 RA Removing And Installing Right Cylinder Head (N62 From 9_03 And N62TU)|Page 286

6 Series E64 650i (N62TU) CONVER

Page 3
background image

Detach guide rail from cylinder head.

Release screws between cylinder head and timing case cover.

Note:

At narrow points, use a socket with 3/8" drive and a short
extension.

Release cylinder-head bolts in sequence 10 ... 1.

Lift off cylinder head.

Lift off cylinder head gasket.

Remove chain tensioning piston (1).

RA  Removing and installing right cylinder head (N62 from 9/03 and N62TU)

BMW AG - TIS

05.02.2013  14:49

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 3 -

4 RA Removing And Installing Right Cylinder Head (N62 From 9_03 And N62TU)|Page 288 > < 4 RA Removing And Installing Right Cylinder Head (N62 From 9_03 And N62TU)|Page 286