6 Series E64 650i (N62TU) CONVER
Insert and tighten down guide rail screw.
Note:
Illustration with engine removed.
Install eccentric shaft sensor (2).
Tighten down chain tensioning piston (1).
Tightening torque 11 31 8AZ
.
Install inlet and exhaust adjustment units on right side.
Assemble engine.
RA Removing and installing right cylinder head (N62 from 9/03 and N62TU)
BMW AG - TIS
05.02.2013 14:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
