6 Series E64 650i (N62TU) CONVER
11 14 110
Removing and installing bottom timing case
cover (N62 / N62TU)
Special tools required:
•
23 1 040
Necessary preliminary tasks:
•
Remove engine
•
Remove both cylinder heads
•
Remove lower oil sump section
•
Remove upper oil sump section
•
Remove vibration damper
•
Remove water pump
•
Remove tensioner from poly-V-belt
•
Remove alternator with housing
•
Remove hub for vibration damper
•
Remove flywheel
•
Remove rear coolant cap
Release screws along lines (1).
Remove timing case cover (2) towards front.
RA Removing and installing bottom timing case cover (N62 / N62TU)
BMW AG - TIS
05.02.2013 14:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
