6 Series E64 650i (N62TU) CONVER
11 25 530
Removing and installing/replacing all pistons
(N62TU)
Special tools required:
•
00 9 120
•
11 5 430
•
11 5 440
•
11 5 450
Important!
Re-install piston, conrod and bearing shells back in the same
position and in the same installation location.
Conrods and conrod bearing caps are denoted with the same
pairing letters, do not mix them up.
Necessary preliminary tasks:
•
(engine removed)
•
Install engine on assembly stand
•
Remove both cylinder heads
•
Removing oil pan
•
Remove oil pump
In event of heavy oil carbon residue:
Carefully remove oil carbon residue from cylinder wall.
RA Removing and installing/replacing all pistons (N62TU)
BMW AG - TIS
05.02.2013 15:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
