6 Series E64 650i (N62TU) CONVER
13 62 531
Replacing coolant temperature sensor (N62,
N62TU)
Warning!
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
E65 only. E66:
Remove design cover.
Recycling
Catch and dispose of escaping coolant.
Observe country-specific waste-disposal regulations.
Coolant temperature sensor is mounted on water pipe at front.
Unlock plug (1) and remove.
Release temperature sensor (2).
Installation:
Tightening torque 13 62 2AZ
.
Vent cooling system and check for leaks.
If necessary, top up coolant.
RA Replacing coolant temperature sensor (N62, N62TU)
BMW AG - TIS
05.02.2013 16:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
