6 Series E64 650i (N62TU) CONVER
Press in retaining lugs (1) with screwdriver (2) and remove cable
duct (3).
Tie wiring harness to one side.
Release screws (1) to support transmission.
Tightening torque 23 00 1AZ
.
Supporting transmission:
Support transmission with special tools 00 2 030 , 23 0 132 ,
23 0 131 , 23 0 136 and 21 0 135.
Unfasten screws (1) and nuts (2).
Remove transmission cross-member.
Tightening torque 22 32 3AZ/4AZ
.
RA Removing and installing transmission (GS6S53BZ SMG)
BMW AG - TIS
05.02.2013 17:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -