6 Series E64 650i (N62TU) CONVER
Remove sealing cap (1) using a screwdriver (2).
Service opening must not be damaged. Burr can cause the
sealing cap to leak.
Installation:
Replace sealing cap.
Release fitting screw (1).
Tightening torque 23 31 3AZ
.
Installation:
Replace fitting screw.
Remove screws (1) and (2).
Tightening torque 23 41 1/7AZ .
Pull out shift actuator (4)
Do not detach hydraulic line (3).
Installation:
Clean sealing surfaces.
Apply Loctite 574 sealing compound to sealing faces.
Unlock plug (1) and detach from holder.
Release screws (2).
Tightening torque 23 41 7AZ
.
RA Replacing hydraulic unit GS6S53BZ SMG (transmission removed)
BMW AG - TIS
05.02.2013 17:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
