6 Series E64 650i (N62TU) CONVER
Release screws.
Tightening torque, 24 00 1AZ
.
Installation:
Bore (1) in driving disk must be accessible from opening on
engine oil pan.
Check that dowel sleeves are correctly seated.
Replace damaged dowel sleeves.
Installation:
Rotate torque converter until bore in torque converter is flush with
bore in driving disc.
Flange automatic transmission to engine.
RA Removing and installing automatic transmission (6HP26Z/ N62, N62TU)
BMW AG - TIS
05.02.2013 17:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
