6 Series E64 650i (N62TU) CONVER
Expose return line up to connection on power steering gear.
Release banjo bolt (1) and remove return line (2).
Installation:
Replace all sealing rings.
Make sure return line is laid without tension and with sufficient
spacing to adjoining components.
Tightening torque 32 41 3AZ
.
After installation:
•
Fill and bleed hydraulic system
•
Check pipe connections for leaks
RA Replacing return line for power steering (N62, N62TU)
BMW AG - TIS
05.02.2013 19:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -