6 Series E64 650i (N62TU) CONVER
51 45 380
Removing and installing (replacing) right
decorative strip on instrument panel
Special tools required:
•
00 9 317
Release screws (1).
Partially fit special tool 00 9 317 as illustrated.
Lever out right decorative strip on instrument panel (3) at
retaining points (2) and pull back.
Version up to MY 2004:
Lever out lock (1) towards front and detach Bowden cable (2).
Version from MY 2005:
Lever out lock (1) towards rear and detach Bowden cable (2)
upwards.
Disengage Bowden cable nipple (3) and remove right decorative
strip on instrument panel.
Installation:
Clips (1) must be seated in associated mountings.
If necessary, remove clips (1) remaining on right decorative strip
on instrument panel.
Replace damaged clips (1):
A
Turn clip (1) with screwdriver to left by approx. 60
°
.
B
Lever out clip (1) from below.
RA Removing and installing (replacing) right decorative strip on instrument panel
BMW AG - TIS
05.02.2013 22:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
