6 Series E64 650i (N62TU) CONVER
Right side:
Unlock and disconnect upper and lower plug connections (1).
Disconnect cable straps.
Installation:
Replace faulty cable straps.
Release screws (1) from retaining bracket on rear window
module.
Tightening torque 54 17 19AZ
.
Note:
Do not release retaining bracket on rollover protection - so as to
ensure correct installation of the rear window module.
Note:
Carry out this part of the work with the assistance of two other persons.
Fit special tool 54 3 110 with supports (1).
RA Removing and installing complete EH convertible top
BMW AG - TIS
05.02.2013 23:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
