6 Series E64 650i (N62TU) CONVER
Installation:
Fit control unit for xenon headlight (3) exactly on headlight.
Make sure plug housing (1) is correctly seated on pin
housing (2).
Build date after 09/2007:
Release screws (1). Tightening torque
63 12 4AZ
.
Remove control unit for xenon headlight (2) from headlight.
Disconnect plug connection (1).
Remove control unit for xenon headlight (2).
Installation:
Make sure seal (3) is correctly seated on headlight.
Make sure wiring harnesses are correctly routed.
RA Replacing control unit for left xenon headlight
BMW AG - TIS
06.02.2013 01:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
