6 Series E64 650i (N62TU) CONVER
63 21 183
Removing and installing/replacing left or right
rear light (on bumper trim)
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
Necessary preliminary tasks:
•
Remove bumper trim
Build date up to 09/2007:
Disconnect plug connection (1).
Release screws (2). Tightening torque 63 21 2AZ
.
Feed rear light (3) in direction of arrow out of bumper trim (4)
and remove.
Installation:
Plastic lugs (1) must not be damaged.
Make sure wiring harness (2) is laid correctly.
RA Removing and installing/replacing left or right rear light (on bumper trim)
BMW AG - TIS
06.02.2013 01:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
