6 Series E64 650i (N62TU) CONVER
63 99 140
Replacing bulb for front left (or right) side
lights
Warning!
Version with xenon headlights: Danger to life due to high
voltage! Therefore, before removing, disconnect all
components from the power supply (lighting system and
ignition off).
Work on the entire xenon lighting system (control unit, ignition
unit with bulb) may only be carried out by specialist personnel.
Follow instructions for handling light bulbs (exterior lights).
Note:
Removing the pull cables on the hood/bonnet lock is only required
for replacing the bulb for the front left side light.
Unclip housing (1) at points (2).
Remove cover (3) from housing (1).
Unclip hood/bonnet lock pull cable (1) in area (2) and disengage
at point (3).
Place housing (4) with associated pull cables in working area to
one side.
Installation:
Make sure hood/bonnet lock pull cables are correctly laid.
Unlock catch (1) and remove cap (2) in direction of arrow.
Installation:
Make sure seal is correctly fitted on cover (2) and cover (2) is
correctly seated on headlight.
RA Replacing bulb for front left (or right) side lights
BMW AG - TIS
06.02.2013 01:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -