6 Series E64 650i (N62TU) CONVER
67 61 541
Removing and installing/replacing drive for
rear window
Necessary preliminary tasks:
•
Remove rear window
Release screws (1) and remove cap (2).
Note:
If necessary, mark drive shafts (1).
Detach drive shafts (1) in each case in direction of arrow.
Installation:
Do not mix up drive shafts (1), pay attention to relevant markings.
Unfasten plug connection (5) and disconnect.
Release screws (2), tightening torque 54 34 6AZ
.
Remove plate (3) together with drive for rear window (4).
RA Removing and installing/replacing drive for rear window
BMW AG - TIS
06.02.2013 03:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -