6 Series E64 650i (N62TU) CONVER
Installation:
Coding of inertia reel (lug) must run into opening in backrest.
Note:
The operation Removing inertia reel with flex shaft and coupling
gear ends here.
Removing belt guide:
Note:
Protect belt guide against damage (scratches).
Trims of belt guide at front and rear (1) are destroyed when
removed!
Installation:
Pay particular attention to cutting line between both trims.
If the trims are not fully clipped into place, this will result in grinding
noises when the belt is pulled.
Release screw on belt guide.
E46: Tightening torque 72 11 16AZ
.
E64: Tightening torque 72 11 02AZ
.
RA Removing and installing/replacing front seat belt
BMW AG - TIS
06.02.2013 03:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -