7 Series E32 730i (M30) SAL
Unfasten all screws with large heads (12 off)
Lift off shift unit.
Installation:
The shift unit must lie flat.
Evenly tighten down screws in several passes.
Tightening torque,
refer to Technical Data 24 30 1AZ.
Installation:
When fitting the shift unit, insert spigot of detent disc in groove
of slide valve.
Remove suction and pressure pipes from shift unit and replace all
O-rings.
Installation:
For ease of installation, coat O-rings with Vaseline.
Install the suction and pressure pipes into the transmission
housing.
Upend the transmission (converter bell housing upward).
Unfasten retaining screws on oil supply unit.
Installation:
Replace sealing rings(1).
Screws (2) on oil duct M6 x 65, remaining screws M6 x 40.
Tightening torque,
refer to Technical Data 24 31 3AZ.
RA Dismantling and assembling automatic transmission (A5S560Z)
BMW AG - TIS
25.01.2013 21:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -