7 Series E32 730i (M30) SAL
Installation:
For ease of assembly, coat perimeter of cylinder D/E (1) with
Vaseline.
Align threaded bores in cylinder D/E (1) with bores in
transmission case.
Carefully insert complete unit.
Caution!
Do not abut against transmission case.
Remove special tool.
Lift off cylinder D/E (1).
Installation:
Fit cylinder D/E with aligned discs on the planetary drive.
Twist housing of planetary gear set to and fro briskly until
discs on multi-disc brakes engage completely in the spline
teeth.
Control dimension (A) approx. 45mm.
Lift out snap ring (1) from multi-disc brake D and remove complete
disc pack.
Installation:
Note installation position of snap ring ends.
Align lined discs.
RA Dismantling and assembling automatic transmission (A5S560Z)
BMW AG - TIS
25.01.2013 21:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 16 -