7 Series E32 740i (M60-2) SAL
Caution!
When fitting cylinder head, press oil separator outwards.
Fit cylinder head and install new cylinder head screws.
Do not wash off bolt coating.
Note:
Use special tool 00 9 120 as a torsion angle bracket.
Tighten down cylinder head screws in sequence 1 ... 10.
Tightening torque,
refer to Technical Data 11 12 8AZ.
Ensure that oil return pipe is correctly seated in oil separator.
RA Removing and installing left cylinder head (M60)
BMW AG - TIS
05.02.2013 14:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
