7 Series E32 740i (M60-2) SAL
11 12 719
Milling down cylinder head gasketing face
(M60)
(Cylinder head dismantled)
Check evenness of cylinder-head ceiling surface with straight
edge (commercially available).
Deviation from planeness max. 0.05 mm.
Note:
Machine limit,
refer to Technical Data
Caution!
To compensate for compression, there is a repair cylinder
head gasket.
Note:
The repair cylinder head gasket is designated on the front with
a bore.
RA Milling down cylinder head gasketing face (M60)
BMW AG - TIS
05.02.2013 14:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
