7 Series E32 740i (M60-2) SAL
11 14 110
Removing and installing/sealing or replacing
timing case cover at bottom (M60)
Special tools required:
•
00 9 190
Remove engine.
Secure engine to special tool 00 1 450.
Remove both cylinder heads. This operation is described in the
section "Removing left/right cylinder head".
Remove water pump with thermostat housing.
Remove upper oil sump section.
Remove hub for vibration damper.
Unfasten lower timing case cover.
RA Removing and installing/sealing or replacing timing case cover at bottom (M60)
BMW AG - TIS
05.02.2013 14:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
