7 Series E32 740i (M60-2) SAL
Install screws in exhaust camshaft on cylinder bank 5-8 and fit
flush.
Rotate engine from 45
°
before TDC position engine-wise until in
TDC position.
Hold crankshaft in TDC position with special tool 11 2 300.
Caution!
Remove special tool 11 2 300 before switching on the
engine.
Fit sprocket and chain to intake camshaft on cylinder bank 5-8 in
such a way that arrow on cylinder axis faces upwards and long
bores are centrally aligned.
Insert screws and fit flush.
Install special tool 11 3 390 in right timing case cover.
RA Replacing left camshaft (M60)
BMW AG - TIS
05.02.2013 15:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
