7 Series E32 740i (M60-2) SAL
Unfasten oil pump screws.
Remove oil pump.
(1)
Remove upstream oil line (before filter) and
(2)
Governing line (filtered oil) from engine block.
Installation:
Replace sealing ring and apply light coat of oil.
Caution!
Do not shear sealing ring on edge of housing.
Installation:
Install governing line (filtered oil) in engine block.
Replace sealing ring.
Note:
Preassemble sealing ring on governing line.
RA Removing and installing/replacing oil pump (M60)
BMW AG - TIS
05.02.2013 15:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -