7 Series E32 740i (M60-2) SAL
Battery positive lead on starter, release nut.
Disconnect battery positive lead.
Tightening torque,
refer to Technical Data 12 41 4AZ.
Lift rubber cap off positive battery support point on floor assembly.
Unfasten nut.
Unscrew screw.
Remove positive battery line.
RA Removing and installing or replacing battery positive lead (between starter, alt
BMW AG - TIS
05.02.2013 15:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
