7 Series E32 740i (M60-2) SAL
Unfasten plug connection on oil level switch.
Unfasten plug connection on cable duct (1 to 3).
(1)
Knock sensor cylinders (3 and 4)
(2)
Knock sensor cylinders (1 and 2)
(3)
Pulse generator for TDC on vibration damper on the
crankshaft
Only M60 B30:
Disconnect plug connection (1) on solenoid valve for air
accumulator.
Press down retaining bracket.
Pull off connectors.
RA Replacing wiring harness section for engine (M60, M62)
BMW AG - TIS
05.02.2013 15:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
