7 Series E32 740i (M60-2) SAL
Remove relays (1 and 2) with bracket.
(1)
Relay for oxygen sensor heating
(2)
Relay for Digital Motor Electronics (DME)
(can be recognized because cross section of feed lines is
greater than 2.5 mm
2
)
Disconnect plug connection on temperature sensor of electronics
box.
Disconnect plug connection (1 to 3).
(1)
Control unit for automatic transmission
(2)
Control unit for cruise control
(3)
Control unit for Digital Motor Electronics (DME)
Disconnect plug connections (1 to 4).
RA Replacing wiring harness section for engine (M60, M62)
BMW AG - TIS
05.02.2013 15:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -