bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Fuel Pressure Regulator (M60)|Page 471 > < 1 RA Replacing Idle Speed Control Valve (M60, M62)|Page 468
Page 1
background image

13 51 630

Replacing fuel pressure regulator (M60)

Caution!

The fuel in the fuel lines is under pressure (approx. 3 - 5
bar)! Catch and dispose of escaping fuel.

Follow instructions for checking fuel pressure,

refer to 13 31. . . Fuel pressure check.

Acoustic cover version 1:

Acoustic cover screwed down.

Remove seal caps (1) and unfasten nuts (2).

Remove acoustic cover.

Acoustic cover version 2:

Acoustic cover with press-stud fasteners.

Press press-stud fasteners (1 ... 4) in succession and at same
time raise acoustic cover slightly. Remove acoustic cover when all
four press-stud fasteners have been unlocked.

Installation:

Position acoustic cover and press downwards until press-
studs fasteners (1 ... 4) click audibly into place.

Installion location of fuel pressure regulator:

On the rear suction unit beside the electronics box.

RA  Replacing fuel pressure regulator (M60)

BMW AG - TIS

05.02.2013  16:11

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Replacing Fuel Pressure Regulator (M60)|Page 471 > < 1 RA Replacing Idle Speed Control Valve (M60, M62)|Page 468