7 Series E32 740i (M60-2) SAL
32 00 Steering
Type
Thread
Tightening specification
Measure
1AZ Steering gear to front axle carrier
E21
50 Nm
E21 (power
steering)
41 Nm
E12, E23, E24
42 Nm
E24 / from
5.82, E28, E31,
E32, E34
M12
80 Nm
E28, E30, E36,
E46
M10
42 Nm
E32/3 / 750iLs
M10 10.9
110 Nm
E38
M10 8.8
Press steering gear
outwards to stop on front
axle support and first
tighten both front screws.
42 Nm
E38 / Ball-and-
nut steering,
E39 / Ball-and-
nut steering
M10 10.9
62 Nm
E39 / Rack-
and-pinion
steering gear,
E52
M10
Replace screws
42 Nm
E53
M12 10.9
Jointing torque
50 Nm
Torque angle
90
°
E60 / REAR
END, E61 /
REAR END,
E63, E64, E65,
E66, E67
Replace screws & nuts
Jointing torque
56 Nm
Torque angle
90
°
AZD Steering
BMW AG - TIS
05.02.2013 21:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -