7 Series E32 740iL (M60-2) SAL
Fit special tool 11 2 443 to special tool 11 2 445 / 441 and
secure with special tool 11 2 444 using the spark plug thread.
Fit special tool 11 2 443 to special tool 11 2 446 / 442 and
secure with special tool 11 2 444 using the spark plug thread.
Crank engine from the 45
°
before TDC position in direction of
rotation up to TDC position. Secure crankshaft in TDC position
with special tool 11 2 300.
Caution!
Remove special tool 11 2 300 before starting engine.
Attach sprocket wheel with chain to inlet camshaft on cylinder
bank 5 to 8 so that arrow points upwards in cylinder axis and
elongated holes are centrally aligned.
Fit screws with no clearance.
RA Removing and installing left cylinder head (M60)
BMW AG - TIS
06.02.2013 08:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -