7 Series E32 740iL (M60-2) SAL
Note:
From 10/93, a new guide rail has been installed without
mounting to the cylinder head. The fastening point for the
screw (1) is omitted. The new guide rail may also be installed
in pre-10/93 engines.
If necessary, mount guide rail on cylinder head.
Caution!
Do not damage the cylinder head.
If necessary, rework open-end wrench.
Align camshafts with open-end wrench.
Fit special tool 11 2 445 / 441 to camshafts on cylinder
bank 1 to 4.
Note:
When the first cylinder is in TDC firing position, the marker
bores of camshafts 1 and 2 are at the top.
RA Removing and installing right cylinder head (M60)
BMW AG - TIS
06.02.2013 08:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
