7 Series E32 740iL (M60-2) SAL
11 14 141
Replacing radial seal below timing case cover
(M60)
Remove hub for vibration damper,
refer to 11 23 031
Fit special tool 11 2 383 to crankshaft.
Screw on special tool 11 2 380 until it is securely connected to
the radial seal.
Remove radial sealing ring by tightening in the screw.
Coat sealing lips of new radial sealing ring with oil.
Install radial seal until flush with timing case cover, using special
tool 11 1 220 and central screw.
RA Replacing radial seal below timing case cover (M60)
BMW AG - TIS
06.02.2013 08:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
