7 Series E32 740iL (M60-2) SAL
Uniformly untighten bearing covers on camshafts for cylinder bank
5-8 in 1/2 turn stages from outside to inside.
Remove bearing covers and place to one side in orderly fashion.
Lift out camshafts.
Installation
Installation of camshaft is described separately from removal.
Assembly sequence differs between removal and installation.
Camshaft designation:
(3)
Hex head on intake camshaft 5-8 between cylinders 7 and 8
(4)
Hex head on exhaust camshaft 5-8 between cylinders 5 and
6
Install camshafts.
Recesses in camshafts point downwards at angle of approx. 30 -
40
°
from plane of cylinder head.
RA Replacing left camshaft (M60)
BMW AG - TIS
06.02.2013 08:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
