7 Series E32 740iL (M60-2) SAL
Install screws in exhaust camshaft on cylinder bank 1-4 and fit
flush.
Rotate engine from 45
°
before TDC position engine-wise until in
TDC position.
Hold crankshaft in TDC position with special tool 11 2 300.
Caution!
Remove special tool 11 2 300 before switching on the
engine.
Fit sprocket with sensor pin (1) to intake camshaft on cylinder
bank 1-4 with arrow in cylinder axis pointing upwards and long
bores aligned centrally.
Insert screws and fit flush.
Fit special tool 11 2 400 to right cylinder head (cylinder bank 1-
4).
RA Replacing right camshaft (M60)
BMW AG - TIS
06.02.2013 09:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -
