7 Series E32 740iL (M60-2) SAL
Install special tool 11 3 390 in special tool 11 2 400.
Tighten tensioning rail by turning the adjusting screw on the
special tool 11 3 390 with special tool 00 9 250 to 1.3 Nm.
Note:
If installation tolerance is unfavorable, attach special
tool 00 9 250 from underside.
Tighten sprockets in following order:
Three screws on left exhaust camshaft, all screws on right
exhaust camshaft, three screws on left intake camshaft,
all screws on right intake camshaft.
Tightening torque,
refer to Technical Data 11 31 3AZ
Remove special tools 11 2 444 / 443 / 441 / 445.
Remove special tools 11 2 444 / 443 / 442 / 446.
RA Replacing right camshaft (M60)
BMW AG - TIS
06.02.2013 09:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -
