7 Series E32 740iL (M60-2) SAL
Remove special tool 11 2 300.
Turn over engine once.
Tighten down remaining three screws in exhaust and intake
camshafts on cylinder bank 5-8.
Tightening torque,
refer to Technical Data 11 31 3AZ
Relieve load on special tool 11 3 390 and remove with special
tool 11 2 400.
Assemble engine.
RA Replacing right camshaft (M60)
BMW AG - TIS
06.02.2013 09:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
