7 Series E38 728i (M52) SAL
Unscrew bolts and remove oil pan.
Installation:
Clean sealing surfaces.
Use new gasket.
Tightening torque,
refer to Technical Data 24 11 5AZ.
Remove oil container (1) with magnetic disc (2).
Installation:
Clean magnetic disc.
Unfasten screw and remove impulse sensor (1) and retaining clip
(2).
Installation:
Note cable routing.
Tightening torque,
refer to Technical Data 24 34 4AZ.
Unfasten screws and remove oil strainer.
Installation:
If necessary, replace oil strainer.
Tightening torque,
refer to Technical Data 24 31 2AZ.
RA Dismantling and assembling automatic transmission (A5S560Z)
BMW AG - TIS
26.01.2013 01:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
