7 Series E38 728i (M52) SAL
51 24 150
Removing and installing/replacing hydraulic
control unit for operating trunk lid
(electrohydraulic/fully automatic)
Read information on automatic trunk lid controls
(electrohydraulic),
refer to 51 24 ...
Remove lid in luggage compartment trim on right,
refer to 51 47 172.
Have a cleaning cloth on hand to catch emerging fluid.
Release expansion rivets (1).
Feed out emergency release mechanism (2) for tank cap and
remove cover (3).
Remove and install battery,
refer to 61 21 010.
Caution!
Catch emerging fluid with a cleaning cloth.
Remove hollow union bolts (1) and (2).
Installation:
1
Hollow union bolt on hydraulic control unit "RED"
2
Hollow union bolt on hydraulic control unit "BLUE"
3
Hose marking is "red"
4
Hose marking is "blue"
Note:
If the hydraulic control unit is replaced or remains removed for
a longer time, the holes on the hydraulic control unit and the
hose connections on the hydraulic cylinder must be plugged.
RA Removing and installing/replacing hydraulic control unit for operating trunk lid
BMW AG - TIS
26.01.2013 14:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -